This site is under construction!
This site is being actively worked on.
Feel you could help? Please do by clicking on the page with a pencil on the right!
This can be done any page too.
Server Scripting Reference
Server Version 3.X
Introduction
BeamMP-Server release v3.0.0 does some drastic changes to the way the Lua plugin system works. There is no way to use the old lua with a new server, so you'll have to migrate.
The Server's Plugin system uses Lua 5.3. This section details how to get started writing plugins, teaches some basic concepts and gets you started with your first plugin. It is recommended you read this section even if you know the pre-v3.0.0 system, as a few things changed drastically.
For a migration guide from pre-v3.0.0 lua, go to the section "Migrating from old Lua".
Directory Structure
Server plugins, unlike mods, are situated (by default) in Resources/Server
, while mods, which are written for BeamNG.drive and are sent to the clients are in Resources/Client
. Each plugin must have it's own subfolder in Resources/Server
, for example for a plugin called "MyPlugin", the structure would be:
Here we also display another plugin called "SomeOtherPlugin", to illustrate how your Resources/Server
folder can have multiple different plugin folders. We will keep using this directory structure as an example throughout this guide.
You also notice the main.lua
. You can have as many Lua .lua
files as you like. All Lua files in your plugin's main directory are loaded in alphabetical order (so aaa.lua
is run before bbb.lua
).
Lua Files
Each Lua .lua
file in the plugin's folder is loaded on server startup. This means that statements outside of functions are evaluated ("run") immediately.
Lua files in subfolders are ignored, but can be require()
-ed.
For example, our main.lua
looks like this:
When the server starts and the main.lua
is loaded, it will run print("What's up!")
immediately, but will NOT call the PrintMyName
function yet (because it wasn't called)!
Events
An event is something like "a player is joining", "a player sent a chat message", "a player spawned a vehicle".
You can cancel events (if they are cancellable) by returning 1
from the handler.
In Lua, you usually want to react to some of these. For this, you can register a "Handler". This is a function which is called when an event happens, and gets passed some arguments.
Example:
function MyChatMessageHandler(sender_id, sender_name, message)
-- censoring only the exact message 'darn'
if message == "darn" then
-- cancel the event by returning 1
return 1
else
return 0
end
end
MP.RegisterEvent("onChatMessage", "MyChatMessageHandler")
This will effectively make sure that any message that is exactly equal to "darn" will not be sent and won't show in chat (note that for a real profanity filter you'd want to see if the message contains "darn", not is "darn"). Cancelling an event causes it to not happen, for example a chat message not to be shown to anyone else, a vehicle not to be spawned, etc.
Custom Events
You can register to any event you like, for example:
You can then trigger those custom events:
-- call all event handlers to this in ALL plugins
MP.TriggerGlobalEvent("MyCoolCustomEvent")
-- call all event handlers to this in THIS plugin
MP.TriggerLocalEvent("MyCoolCustomEvent")
You can do a lot more with events, but those possibilities will be covered in detail below in the API reference.
Event Timers ("Threads")
Pre-v3.0.0 Lua had a concept of "threads" which run X times per second. This naming was slightly misleading, as they were synchronous.
v3.0.0 Lua instead has "Event Timers". These are timers which run inside the server, and once they run out, they trigger an event (globally). This is also synchronous. Please be aware that the second argument is an interval in milliseconds.
Example:
local seconds = 0
function CountSeconds()
seconds = seconds + 1
end
-- create a custom event called 'EverySecond'
-- and register the handler function 'CountSeconds' to it
MP.RegisterEvent("EverySecond", "CountSeconds")
-- create a timer for this event, which will fire every 1000ms (1s)
MP.CreateEventTimer("EverySecond", 1000)
This will cause "CountSeconds" to be called every second. You can also cancel event timers with MP.CancelEventTimer
(see API reference).
From the server's console, you can run status
to see how many event timers are currently running, as well as info about event handlers that are waiting. This command will show more information in the future.
Debugging
Lua is difficult to debug. An industry-grade debugger like gdb
sadly doesn't exist for embedded Lua.
Generally, you can of course simple print()
the values you want to inspect at any time.
In v3.0.0, the server provides a way for you to inject an interpreter into a plugin and subsequently run Lua inside it in realtime. This is the closest we have to a debugger.
Assuming you have the plugin from above which we called MyPlugin
, you can enter into its Lua state like so:
Capitalisation matters here, so be careful its entered correctly. The output is something like
As you can see, we switched into the Lua state forMyPlugin
. From now on until we enter exit()
(as of v3.1.0 :exit
), we will be in MyPlugin
and can execute Lua there.
For example, if we have a global called MyValue
, we can print that value like so:
You can call functions here and do anything you expect to be able to do.
Since v3.1.0: You can press TAB to autocomplete functions and variables.
WARNING: Sadly, if the Lua state is currently busy executing other code (like a while
loop), this can fully hang the console until it finishes that work, so be very careful switching to states which may be waiting for something to happen.
Additionally, you can run status
in the regular console (>
), which will show you some statistics about Lua, among other things.
Custom Commands
In order to implement custom commands for the server console, the event onConsoleInput
can be used.
This can be useful when you want to add a way for the server owner to signal something to your plugin, or to display internal state in a custom way.
Here's an example:
function handleConsoleInput(cmd)
local delim = cmd:find(' ')
if delim then
local message = cmd:sub(delim+1)
if cmd:sub(1, delim-1) == "print" then
return message
end
end
end
MP.RegisterEvent("onConsoleInput", "handleConsoleInput")
This will enable you to do the following in the server's console:
We implemented our own print
. As an exercise, try to build a function like say
, which sends a chat message to all players, or even a specific player (with MP.SendChatMessage
).
Caution: For your own plugins, it's generally recommended to "namespace" them. Our print
example, in a plugin called mystuff
, could be called mystuff.print
or ms.print
or similar.
API Reference
Documentation format: function_name(arg_name: arg_type, arg_name: arg_type) -> return_types
Builtin Functions
print(...)
, printRaw(...)
Prints the message to the server console, prefixed with [DATE TIME] [LUA]
. If you don't want this prefix, you can use printRaw(...)
.
Example:
It can take as many arguments of arbitrary types as you like. It will also happily dump tables!
This behaves like the lua interpreter's print
, so it will put tabs between arguments.
exit()
Shuts down the server gracefully. Causes the onShutdown
event to be triggered.
MP Functions
MP.CreateTimer() -> Timer
Creates a timer object, which can be used to keep track of how long something took / how much time elapsed. It starts once created, and can be reset/restarted with mytimer:Start()
.
You can get the current elapsed time in seconds with mytimer:GetCurrent()
.
Example:
local mytimer = MP.CreateTimer()
-- do stuff here that needs to be timed
print(mytimer:GetCurrent()) -- print how much time elapsed
Timers do not need to be stopped (and can't be stopped), they have no overhead.
MP.GetOSName() -> string
Returns the name of the current OS, either Windows
, Linux
or Other
.
MP.GetServerVersion() -> number,number,number
Returns the current server version in major, minor, patch format. For example, the v3.0.0 version would return 3, 0, 0
.
Example:
Output:MP.RegisterEvent(event_name: string, function_name: string)
Remembers the function with name Function Name
as an event handler to event with name Event Name
.
You can register as many handlers to an event as you like.
For a list of events the server provides, see here.
If the event with that name doesn't exist, it's created, and thus RegisterEvent cannot fail. This can be used to create custom events.
MP.CreateEventTimer(event_name: string, interval_ms: number, [strategy: number (since v3.0.2)])
Starts a timer inside the server which triggers the event event_name
every interval_ms
milliseconds.
Event timers can be cancelled with MP.CancelEventTimer
.
Intervals <25 ms are not encouraged, as multiple such intervals will likely not be served in time reliably. While multiple timers can be started on the same event, it's encouraged to create as few event timers as possible. For example, if you need one event that runs every half second, and one which runs every second, consider just making the half-second one and running the every-second-functiosecond trigger.
You may also use MP.CreateTimer
to make a timer and measure time passed since the last event call, in order to minimize event timers, though this is not necessarily recommended as it increases the code complexity significantly.
Since 3.0.2:
An optional CallStrategy
may be supplied as the third argument. This can be either:
MP.CallStrategy.BestEffort
(default): Will try to get your event to trigger at the specified interval, but will refuse to queue handlers if a handler takes too long.MP.CallStrategy.Precise
: Will enqueue event handlers at the exact interval specified. Can lead to the queue filling up if the handler takes longer than the interval. Only use if you NEED the exact interval.
MP.CancelEventTimer(event_name: string)
Cancels all timers on the event with the name event_name
On some occasions, the timer might go off one more time before being cancelled, due to the nature of asynchronous programming.
MP.TriggerLocalEvent(event_name: string, ...) -> table
Plugin-local synchronous event trigger.
Triggers an event locally, which causes all handlers to that event in the current lua state (usually the current plugin, unless state was shared via PluginConfig.toml) to be called.
You can pass arguments to this function (...
) which are copied and sent to all handlers as function arguments.
This call is synchronous and will return once all event handlers finished.
The returned value is a table of all results. If a handler returned a value, it will be in this table, unannotated and unnamed. This can be used to "collect" things, or register sub-handlers for events that can be cancelled. This is practically an array.
Example:
MP.TriggerGlobalEvent(event_name: string, ...) -> table
Global asynchronous event trigger.
Triggers an event globally, which causes all handlers to that event in all plugins (including this plugin) to be called.
You can pass arguments to this function (...
) which are copied and sent to all handlers as function arguments.
This call is asynchronous and returns a future-like object. Local handlers (handlers in the same plugin as the caller) run synchronously and immediately.
The table returned has two functions:
IsDone() -> boolean
tells you whether all handlers have finished. You can wait until this is true by checking it andMP.Sleep
-ing for a little bit in a loop.GetResults() -> table
returns an unannotated unnamed table with all return values of all handlers. This is practically an array.
Make sure to call these with Obj:Function()
syntax (:
, NOT .
).
Example:
local Future = MP.TriggerGlobalEvent("MyEvent")
-- wait until handlers finished
while not Future:IsDone() do
MP.Sleep(100) -- sleep 100 ms
end
local Results = Future:GetResults()
print(Results)
Be aware that a handler registering to "MyEvent" here and never returning could lock up your plugin. You likely want to keep track of how long you have waited and stop waiting after a few seconds.
MP.Sleep(time_ms: number)
Waits for an amount of time, specified in milliseconds.
This does not yield the execution of the lua state and nothing will execute in the state while asleep.
WARNING: Do NOT sleep for >500 ms if you have event handlers registered, unless you know exactly what you are doing. This is intended to be used to sleep for 1-100 ms, in order to wait for results or similar. A locked up (sleeping) lua state can slow the entire server down drastically if not careful.
MP.SendChatMessage(player_id: number, message: string)
Sends a chat message that only the specified player can see (or everyone if the ID is -1
).
In the game, this will not appear as a directed message.
You can use this, for example, to tell a player why you cancelled their vehicle spawn, chat message, or similar, or to display some information about your server.
MP.TriggerClientEvent(player_id: number, event_name: string, data: string) -> boolean
until v3.1.0
MP.TriggerClientEvent(player_id: number, event_name: string, data: string) -> boolean,string
since v3.1.0
MP.TriggerClientEventJson(player_id: number, event_name: string, data: table) -> boolean,string
since v3.1.0
Will call the given event with the given data on the specified client (-1 for broadcast). This event can then be handled in a clientside lua mod, see the "Client Scripting" documentation for this.
Will return true
if it was able to send the message (for id = -1
, so broadcasts, its always true
), and false
if the player with that ID doesn't exist or is disconnected but still has an ID (this is a known issue).
If false
is returned, it makes no sense to retry this event, and a response (if any was expected) shouldn't be expected.
Since v3.1.0, the second return value contains an error message if the function failed. Also since this version, the *Json
version of the function takes a table as the data argument, and converts it to json. This is simply a shorthand for MP.TriggerClientEvent(..., Util.JsonEncode(mytable))
.
MP.GetPlayerCount() -> number
Returns the amount of players currently in the server.
MP.GetPositionRaw(pid: number, vid: number) -> table,string
Returns the current position of the vehicle vid
(vehicle id) of player pid
(player id), and an error string if an error occurred.
The table is decoded from a position packet, so it has a variety of data (that's why this function is postfixed "Raw").
TODO: Document fields. For now, users need to print() the result.
MP.IsPlayerConnected(player_id: number) -> boolean
// TODO Documentation incomplete
Whether the player is connected.
MP.GetPlayerName(player_id: number) -> string
Gets the display-name of the player.
MP.RemoveVehicle(player_id: number, vehicle_id: number)
Removes the specified vehicle for the specified player.
MP.GetPlayerVehicles(player_id: number) -> table
Returns a table of all vehicles the player currently has. Each entry in the table is a mapping from vehicle ID to vehicle data (which is currently a raw json string).
MP.GetPlayers() -> table
Returns a table of all connected players. This table maps IDs to Names, like so:
MP.IsPlayerGuest(player_id: number) -> boolean
Whether the player is a guest. A guest is someone who didn't log in, and instead chose to play as a guest. Their name is usually guest
followed by a long number.
As guests aren't logged in, you might want to disallow them from joining, for example when running a serious racing server or similar.
MP.DropPlayer(player_id: number, [reason: string])
Kicks the player with the specified ID. The reason parameter is optional.
MP.GetStateMemoryUsage() -> number
Returns the memory usage of the current Lua state in bytes.
MP.GetLuaMemoryUsage() -> number
Returns the memory usage of all lua states combined, in bytes.
MP.GetPlayerIdentifiers(player_id: number) -> table
Returns a table with information about the player, such as beammp forum ID and IP address.
Example:
Until v3.1.0 the ip
field is incorrect and will not work as intended. Fixed in v3.1.0.
MP.Set(setting: number, ...)
Sets a ServerConfig setting temporarily. For this, the MP.Settings
table is useful.
Example:
Turning on Debug mode
MP.Settings
You can see an up-to-date list of these by printing them, like so:
Util Functions
Util.Json*
Since BeamMP-Server v3.1.0
.
This is a builtin JSON library, which is usually much faster than any Lua JSON library. Behind the scenes, C++'s nlohmann::json
library is used, which is JSON compliant, full-coverage unit tested and continuously being fuzzed.
Util.JsonEncode(table: table) -> string
Encodes a Lua table into a JSON string, recursively (tables inside tables inside tables ... work as expected). All primitive types are respected, functions, userdata and similar are ignored.
The resulting JSON is minified and can be pretty-printed by using Util.JsonPrettify
to prettify it.
Example:
local player = {
name = "Lion",
age = 69,
skills = { "skill A", "skill B" }
}
local json = Util.JsonEncode(player)
Results in:
Util.JsonDecode(json: string) -> table
Decodes JSON into a Lua table. Will return nil
if this failed, and print an error.
Example:
Results in:
Util.JsonPrettify(json: string) -> string
Add indentation and newlines to the json to make it more readable for humans.
Example:
local myjson = Util.JsonEncode({ name="Lion", age = 69, skills = { "skill A", "skill B" } })
print(Util.JsonPrettify(myjson))
Results in:
Util.JsonMinify(json: string) -> string
Removes indentation, newlines and any other whitespace. Not necessary unless you called Util.JsonPrettify
, as all output from Util.Json*
is already minified.
Example:
local pretty = Util.JsonPrettify(Util.JsonEncode({ name="Lion", age = 69, skills = { "skill A", "skill B" } }))
print(Util.JsonMinify(pretty))
Results in:
Util.JsonFlatten(json: string) -> string
Creates a JSON object whose key are flattened to JSON pointers, according to RFC 6901. You can restore the original with Util.JsonUnflatten()
. For this to work, all values need to be primitives.
Example:
local json = Util.JsonEncode({ name="Lion", age = 69, skills = { "skill A", "skill B" } })
print("normal: " ..json)
print("flattened: " .. Util.JsonFlatten(json))
print("flattened pretty: " .. Util.JsonPrettify(Util.JsonFlatten(json)))
Results in:
normal: {"age":69.0,"name":"Lion","skills":["skill A","skill B"]}
flattened: {"/age":69.0,"/name":"Lion","/skills/0":"skill A","/skills/1":"skill B"}
flattened pretty: {
"/age": 69.0,
"/name": "Lion",
"/skills/0": "skill A",
"/skills/1": "skill B"
}
Util.JsonUnflatten(json: string) -> string
Restores the arbitrary nesting of a JSON value that has been flattened before using the Util.JsonFlatten()
function.
Util.JsonDiff(a: string, b: string) -> string
Creates a JSON diff according to RFC 6902 (http://jsonpatch.com/). This diff can then be applied as a patch via Util.JsonDiffApply()
. Returns the diff.
Util.JsonDiffApply(base: string, diff: string) -> string
Applies the JSON diff
to base
as a JSON patch (RFC 6902, http://jsonpatch.com/). Returns the result.
Util.Random*
Since BeamMP-Server v3.1.0
.
Util.Random() -> float
Returns a float between 0 and 1.
Example:
Results in:
Util.RandomIntRange(min: int, max: int) -> int
Returns an integer between min and max.
Example:
Results in:
Util.RandomRange(min: number, max: number) -> float
Returns a float between min and max.
Example:
Results in:
Util.LogInfo(params: ...)
et al (since v3.3.0)
Util.LogInfo("Hello, World!")
Util.LogWarn("Cool warning")
Util.LogError("Oh no!")
Util.LogDebug("hi")
[19/04/24 11:06:50.142] [Test] [INFO] Hello, World!
[19/04/24 11:06:50.142] [Test] [WARN] Cool warning
[19/04/24 11:06:50.142] [Test] [ERROR] Oh no!
[19/04/24 11:06:50.142] [Test] [DEBUG] hi
Supports the exact same printing / dumping of data as print()
does.
Util.DebugExecutionTime() -> table
When Lua code runs in the server, each event handler's execution is timed. The min, max, average (mean) and standard deviation of these execution times are calculated, and are returned in a table by this function. The calculation takes place incrementally, so every time an event handler runs the min, max, average and standard deviation are updated. This way, Util.DebugExecutionTime()
does not usually take any significant amount of time to execute (sub 0.25ms).
It returns a table like this:
[[table: 0x7af6d400aca0]]: {
printStuff: [[table: 0x7af6d400be60]]: {
mean: 0.250433,
n: 76,
max: 0.074475,
stdev: 0.109405,
min: 0.449274,
},
onInit: [[table: 0x7af6d400b130]]: {
mean: 0.033095,
n: 1,
max: 0.033095,
stdev: 0,
min: 0.033095,
},
}
n
: Amount of times the event triggered and a handler was calledmean
: Average/mean of all execution times, in msmax
: The longest execution time, in msmin
: The shortest execution time, in msstdev
: The standard deviation of all execution time averages, in ms
Here's a function you can use to pretty-print this data:
function printDebugExecutionTime()
local stats = Util.DebugExecutionTime()
local pretty = "DebugExecutionTime:\n"
local longest = 0
for name, t in pairs(stats) do
if #name > longest then
longest = #name
end
end
for name, t in pairs(stats) do
pretty = pretty .. string.format("%" .. longest + 1 .. "s: %12f +/- %12f (min: %12f, max: %12f) (called %d time(s))\n", name, t.mean, t.stdev, t.min, t.max, t.n)
end
print(pretty)
end
You may call it like this to debug your code if it's slow:
-- event to print the debug times
MP.RegisterEvent("printStuff", "printDebugExecutionTime")
-- run every 5000 ms = 5 seconds (or 10, or 60, whatever makes sense for you
MP.CreateEventTimer("printStuff", 5000)
FS Functions
FS
functions are filesystem functions, which aim to be better than the default Lua capabilities.
Please always use /
as a separator when specifying paths, as this is cross-platform (windows, linux, macos, ...).
FS.CreateDirectory(path: string) -> bool,string
Creates the specified directory, and any parent directories if they don't exist. Behavior is roughly equivalent to the common linux command mkdir -p
.
Returns whether the operation had an error, and, if it did, an error message. This means that, if true
is returned, an error occurred.
Example:
local error, error_message = FS.CreateDirectory("data/mystuff/somefolder")
if error then
print("failed to create directory: " .. error_message)
else
-- do something with the directory
end
FS.Remove(path: string) -> bool,string
Removes the specified file or folder.
Returns true
if an error occured, with an error message in the second return value.
Example:
local error, error_message = FS.Remove("myfile.txt")
if error then
print("failed to delete myfile: " .. error_message)
end
FS.Rename(pathA: string, pathB: string) -> bool,string
Renames (or moves) pathA
to pathB
.
Returns true
if an error occured, with an error message in the second return value.
FS.Copy(pathA: string, pathB: string) -> bool,string
Copies pathA
to pathB
.
Returns true
if an error occured, with an error message in the second return value.
FS.GetFilename(path: string) -> string
Returns the last part of a path, which is usually the filename. Here are some example inputs + outputs:
input -> output
"my/path/a.txt" -> "a.txt"
"somefile.txt" -> "somefile.txt"
"/awesome/path" -> "path"
FS.GetExtension(path: string) -> string
Returns the extension of the file, or an empty string if no extension exists. Here are some example inputs + outputs
input -> output
"myfile.txt" -> ".txt"
"somefile." -> "."
"/awesome/path" -> ""
"/awesome/path/file.zip.txt" -> ".txt"
"myexe.exe" -> ".exe"
FS.GetParentFolder(path: string) -> string
Returns the path to the parent directory, i.e. the folder a file or folder is contained in. Here are some example inputs + outputs:
FS.Exists(path: string) -> bool
Returns true
if the path exists, false
if it doesn't.
FS.IsDirectory(path: string) -> bool
Returns true
if the specified path is a directory, false
if it's not. Note that false
does NOT imply that the path is a file (see FS.IsFile()
).
FS.IsFile(path: string) -> bool
Returns true
if the specified path is a regular file (not a symlink, hardlink, block device, etc.), false
if it's not. Note taht false
does NOT imply that the path is a directory (see FS.IsDirectory()
).
FS.ListDirectories(path: string) -> table
Returns a table of all the directories in the given path.
Example:
Results in:FS.ListFiles(path: string) -> table
Returns a table of all the files in the given path.
Example:
Results in:FS.ConcatPaths(...) -> string
Adds together (concatenates) all arguments with the system's preferred path separator.
Example:
results inAlso resolves ..
, if that exists in the path at any point. This function is safer than concatenating strings in lua, and respects the platform's separators.
Please always use /
as a separator when specifying paths, as this is cross-platform (windows, linux, macos, ...).
Events
Explanation
- Arguments: List of arguments given to handlers of this event
- Cancellable: Whether the event can be cancelled. If it can be cancelled, a handler can do so by returning
1
, likereturn 1
.
Summary of events
A player join triggers the following events in the given order:
onPlayerAuth
onPlayerConnecting
onPlayerJoining
onPlayerJoin
System Events
onInit
Arguments: NONE Cancellable: NO
Triggered right after all files in the plugin were initialized.
onShutdown
Arguments: NONE Cancellable: NO
Triggered when the server shuts down. Currently happens after all players were kicked.
Game-Related Events
onPlayerAuth
Arguments: player_name: string
, player_role: string
, is_guest: bool
, identifiers: table -> beammp, ip
Cancellable: YES
First event that gets triggered when a player wants to join.
onPlayerConnecting
Arguments: player_id: number
Cancellable: NO
Triggered when a player first starts connecting, after onPlayerAuth
.
onPlayerJoining
Arguments: player_id: number
Cancellable: NO
Triggered when a player has finished loading all mods, after onPlayerConnecting
.
onPlayerDisconnect
Arguments: player_id: number
Cancellable: NO
Triggered when a player disconnects.
onChatMessage
Arguments: player_id: number
, player_name: string
, message: string
Cancellable: YES
Triggered when a player sends a chat message. When cancelled, it will not show the chat message to anyone, not even the player who sent it.
onVehicleSpawn
Arguments: player_id: number
, vehicle_id: number
, data: string
Cancellable: YES
Triggered when a player spawns a new vehicle. The data
argument contains the car's config as json. When cancelled, the car is not spawned.
onVehicleEdited
Arguments: player_id: number
, vehicle_id: number
, data: string
Cancellable: YES
Triggered when a player edits their vehicle and applies the edit. The data
argument contains the car's change config as json. When cancelled, the edit is not applied.
onVehicleDeleted
Arguments: player_id: number
, vehicle_id: number
Cancellable: NO
Triggered when a player deletes their vehicle.
onVehicleReset
Arguments: player_id: number
, vehicle_id: number
, data: string
Cancellable: NO
Triggered when a player resets their vehicle. data
is the car's data as json.
onFileChanged
since v3.1.0
Arguments: path: string
Cancellable: NO
Triggered if a file changes in the Resources/Server
directory or any subdirectory of it.
Any file change in the Resources/Server/<plugin>
directory (not in a subfolder of it) will trigger a Lua state reload, and an onFileChanged
event.
Any file in subfolders of Resources/Server/<plugin>
, such as Resources/Server/<plugin>/lua/stuff.lua
, will not trigger a state reload and will only trigger an onFileChanged
event. This way, you can reload it yourself in the correct way (or not reload it).
This applies to all files, not just .lua
files.
The path
is relative to the root of the server, for example Resources/Server/myplugin/myfile.txt
. You can do further processing on this string with the FS.*
family of functions, such as extracting the name or extension (FS.GetExtension(...)
, FS.GetFilename(...)
, ...).
Note: Files added after the server is started are not tracked as of v3.1.0.
Migrating from old Lua
This is a short run-down of the basic steps to take to migrate from old to new lua.
Understand how the new lua works
For this, please read through the section "Introduction" and all its subsections carefully. It's necessary to do the next steps properly.
Search & Replace
First, you should search and replace all MP functions. The substitution should add an MP.
infront of all MP functions, except print()
.
Example:
becomesGoodbye Threads, Hello Event Timers!
As discussed in the introduction, threads are event timers. For any calls to CreateThread
, replace it with a call to CreateEventTimer
. Carefully inspect the timing your old CreateThread had (the number was X per second), and think about what the event timer timeout value is for this (which is in milliseconds). Also keep in mind that instead of a function name, it takes an event name, so you will have to register an event as well.
Example:
becomesMP.RegisterEvent("myEvent", "myFunction") -- registering our event for the timer
MP.CreateEventTimer("myEvent", 500) -- 500 milliseconds = 2 times per second
If you have many event timers, it makes sense to see if you can combine them, e.g. by creating a "every minute" event and registering multiple functions to it which need to be called every minute, instead of having multiple event timers. Each event timer costs the server a little bit of time to trigger.
No more implicit event calling
You need to register all your events. You cannot rely on function names. In the old lua, this was unclear, but in the new lua this is usually enforced. A good pattern is:
MP.RegisterEvent("onChatMessage", "chatMessageHandler")
-- or
MP.RegisterEvent("onChatMessage", "handleChatMessage")
This is a better pattern than calling the handler the same as the event, which is misleading and confusing.
Server Version 2.X
This is 2.x scripting. Only refer to this if your server is old/outdated (version 2.x.x). For the reference for 3.x scripting and beyond, see this page on 3.x scripting.
Notes
To get the output of a function in the server console you have to wrap it in a print()
statement.
For example:
print(GetPlayerName(0))
will return the name of your server's first player.
<PlayersServerID>
starts at 0.
List of available functions for scripting
GetPlayerName(playersServerID)
Returns the player's discord name as a string
GetPlayerDiscordID(playersServerID)
Returns the player's discord name as a string
GetPlayerHWID(playersServerID)
Returns the player's discord ID as a string
GetPlayerVehicles(playersServerID)
Returns the player's vehicles as an object/array
function onChatMessage(playerID, senderName, message)
local vehicleList = GetPlayerVehicles(playerID)
for vehicleID, vehicleData in pairs(vehicleList) do
-- Do something
-- Could also be used to check how many vehicles a player have
end
end
DropPlayer(playersServerID)
Drops the connection for a specific player. Essentially Kicking them
SendChatMessage(playersServerID, message)
Sends a message over the network to the specified user. Use -1 for everyone
CancelEvent() -- DEPRECIATED
Cancels the event from happening. This might be going soon. Use return 1
to cancel the event.
onInit()
If declared in a lua file, it will be called once C++ successfully finished loading the current lua file
exit()
Will close the server
function onInit()
print("Server Ready. But who needs a server which is running")
exit() -- Stops the server
end
CreateThread(functionName, callInterval)
Will execute the function on a dedicated thread and it will run callInterval times a second. 1 = It will run every second.
function yourFunction()
for i = 1,10 do
SendChatMessage(-1, "Countdown: "..i)
Sleep(1000)
end
end
CreateThread("yourFunction", 30)
DEPRECIATED EXAMPLE Will execute the function on a dedicated thread
function yourFunction()
for i = 1,10 do
SendChatMessage(-1, "Countdown: "..i)
Sleep(1000)
end
end
CreateThread("yourFunction", 30)
StopThread(functionName)
Will stop trying to call the thread function of the current script
function yourFunction()
delayExpired = false
Sleep(10000)
delayExpired = true
end
CreateThread("yourFunction", 30)
-- Do something
if not delayExpired then
StopThread("yourFunction")
else
-- Do something
end
Sleep(millisecs) - DEPRECIATED
Will pause execution for the amount of time specified (warning doing so will pause the entire server if you didn't create a thread)
function countdown()
for i = 1,10 do
SendChatMessage(-1, "Countdown: "..i)
Sleep(1000)
end
end
CreateThread("countdown", 10)
GetPlayerCount()
Will return how many players are connected
function onPlayerJoin(playerID)
SendChatMessage(playerID, "You are the "..GetPlayerCount().."th player!"
end
RemoveVehicle(playerServerID, VehicleID)
Will despawn a vehicle
function onVehicleSpawn(playerID, vehicleID, vehicleData)
if --[[ Vehicle data equal something it shouldn't be ]] then
RemoveVehicle(playerID, vehicleIID)
end
end
GetPlayers()
Will return a table of IDs with Names
local function onPlayerJoin(joinedPlayerID)
local players = GetPlayers()
for playerID, playerName in pairs(players) do
if playerID == joinedPlayerID then
-- Do something
end
end
end
RegisterEvent(eventName, functionName)
Will register that function to the event specified. Both must be strings
function anyEvent()
-- Do something
end
RegisterEvent("onAnyEventHappen", "anyEvent")
-- Do something
TriggerLocalEvent("onAnyEventHappen")
TriggerLocalEvent(eventName)
Will call every registered function in the same plugin folder.
function anyEvent()
-- Do something
end
RegisterEvent("onAnyEventHappen", "anyEvent")
-- Do something
TriggerLocalEvent("onAnyEventHappen")
TriggerGlobalEvent(eventName)
Will call every registered function with this event name.
TriggerClientEvent(playerServerID, eventName, data)
Will call that event with the given data on the specified client (-1 for broadcast)
function onPlayerJoin(playerServerID)
TriggerClientEvent(playerServerID, "anyEvent", "You just joined the server")
end
RegisterEvent("onAnyEventHappen", "anyEvent")
Set(configID, newValue)
will set a config setting to the new specified value table below|
function onChatMessage(playerID, senderName, message)
if playerID == adminPlayer then
if message == --[[ anything ]] then
Set(3, 10)
end
end
end
List of available config settings for the Set()
command
Note that these will not save to the config file.
Config ID | Name | Will only accept |
---|---|---|
0 |
Debug setting | true or false |
1 |
Private setting | true or false |
2 |
Max car per player | number |
3 |
Max players | number |
4 |
Map | string |
5 |
Name | string |
6 |
Description | string |
any other ID will result in a console warning |
List of available events for scripting
Default Events
Example of how to use an event:
function onInit()
RegisterEvent("onPlayerJoin", "onPlayerJoin")
end
function onPlayerJoin(playerServerID)
-- Do something
end
If you dont want guests on your server:
function onInit()
print("noGuests Ready")
RegisterEvent("onPlayerAuth","onPlayerAuth")
end
function onPlayerAuth(name, role, isGuest)
if isGuest then
return "You must be signed in to join this server!"
end
end
Event | Parameters | Description |
---|---|---|
onPlayerAuth |
The player's name, forum role, guest account (bool) | A player has authenticated and is requesting to join |
onPlayerConnecting |
The player's ID | A player is loading in (Before loading the map) |
onPlayerJoining |
The player's ID | A player is loading the map and will be joined soon |
onPlayerJoin |
The player's ID | A player has joined and loaded in |
onPlayerDisconnect |
The player's ID | A player has disconnected |
onChatMessage |
The sender's ID, name, and the chat message | A chat message was sent. This would be good for making a commands system |
onVehicleSpawn |
The player's ID, the vehicle ID, and the vehicle data | This is called when someone spawns a vehicle |
onVehicleEdited |
The player's ID, the vehicle ID, and the vehicle data | This is called when someone edits a vehicle, or replaces their existing one |
onVehicleDeleted |
The player's ID and the vehicle ID | This is called when someone deletes a vehicle they own |
Custom Events
Custom events can also be created for your own use. This is done very much the same to how the default ones are done.
Example of how to use a custom event:
function onInit()
RegisterEvent("myCustomEvent", "myCustomEvent")
end
function myCustomEvent(playerServerID, customData)
-- Do something
end
This can then be called either from client side or serverside using the respective functions.
Players
When a player connects to your server, they are assigned a serverID starting from 0 and counting upwards. serverIDs are reused; if a player leaves and re-joins they will not be assigned a new serverID, they will simply get another available one. When the server restarts, serverIDs will be reset.
Static Identifiers
Players in BeamMP have 3 static identifiers which can be obtained from their serverID being their name, discordID, and their hardwareID or HWID. (though the latter of the aforementioned isn't implemented, we will act as if it is) Each of the three ID types has their own origins and strength's/weaknesses to using them for player identification.
ID TYPE | PROS | CONS | FUNCTION TO OBTAIN |
---|---|---|---|
name | easy to obtain, straightforward | not secure | GetPlayerName() |
discordID | fairly secure | inconvenient | GetPlayerDiscordID() |
HWID | extremely secure | hard to obtain | GetPlayerHWID() |
Vehicles
Vehicles in beamMP have 3 attributes that the server pays attention to, the owner's serverID, the vehicles vehicleID and it's data. The Owner's serverID is straight forward, it is the serverID, every vehicle also has an ID, vehicle IDs are not unique to the vehicle; two vehicles may have the same ID, assuming they're from different owners. Unlike serverIDs, vehicleIDs are reused, for example, if I have 4 vehicles, their IDs are 0, 1, 2 and, 3 if I delete the vehicle in vehicleID 2, I will have 0, 1 and, 3, when I spawn a new vehicle, the new vehicle will slot into ID 2. Lastly, the last attribute vehicles have is data, data contains a vehicle, name, parts, and other data; as the name implies. data is stored as a raw JSON string, so you will need a JSON library alternatively, you can manually step through the string and dig out the information you need.